Update your ISAT Pro Phone firmware here

IsatPhone Pro firmware version 5.11.0 is released and available for download now.

Important: Firmware version 5.11.0 supersedes the firmware version 5.8.1.

Recommendations for installation
For users of 5.3.0 or higher this is a recommended upgrade, meaning that the features introduced by the firmware are important but not critical for the GSPS service, including the network and the IsatPhone Pro handset.

For users that who have not yet upgraded to version 5.3.0 or higher, this upgrade to 5.11.0 is considered to be ‘mandatory’ to avoid the phone becoming non-operational.

To check you have the latest version on your IsatPhone Pro, go to Menu > Settings > About > Firmware version.

To upgrade the Firmware you must first download the following and save on your computer:

1 -Download IsatPhone Pro USB drivers

2 - Download IsatPhone Pro Firmware Upgrade Tool

3 - Download IsatPhone Pro firmware V5.11.0

 Once the above are downloaded and saved proceed as follows

STEP 1 - USB drivers

You will need to install the USB drivers on your PC before installing the contact synchronisation and firmware upgrade tools. Installing the USB drivers also reduces your phone’s charging time. 

Open the location where you saved the USB drivers downloaded and extract the file. To install click on Setup icon.

The guide ‘How to install USB drivers’ is available to download below.

» English

(USB Drivers are compatible with Windows XP, Windows Vista and Windows v7.)

STEP 2 - Firmware Upgrade Tool

Now you have the USB Driver installed open the location where you saved the Firmwareupgradetool and extract the file that you will need to setup.

Please download the instructions below for installation steps.

» English
» Arabic

Step 3 -Firmware.

Locate the firmware file previously downloaded and extract the contents to a folder on the computer. Then browse in the Firware Upgrade Tool to this location to use the current firmware.